Magnatech Pipeliner II 609 Orbital Weld Head for Multi Pass Pipe Welding
- Prihláste sa alebo zaregistrujte pre získanie zľavy
- Doprava nad 150€ bez DPH zadarmo
- Záručný a pozáručný servis
- Odborné poradenstvo
| Názov | Kód | Obrázok | Cena bez DPH | Cena s DPH | Množstvo | |
| Magnatech Pipeliner II 609 Orbital Weld Head for Multi Pass Pipe Welding |
|
|||||
The Magnatech Pipeliner II is designed to make pipe-to-pipe and pipe-to-fitting welds. Interchangeable guide rings mount the head on the pipe, allowing a broad workpiece size range from 168 – 1524 mm (6”– 60”) and larger. The Pipeliner II improves productivity by increasing duty cycle, reducing repair rates, and producing welds of consistent quality.
Features:- Full Function Capability (Torch Rotation, Filler Wire Feed, Motorized Arc Gap Control, Electronic Oscillation)
- Broad Pipe Size Range with change of single component – the Guide Ring
- Water-Cooled Torch uses standard Expendables
Application: Pipe size – 168 mm (6.625”) and larger, Pipe wall thickness – unlimited, Flx-Track™ for welding on flat and curved surfaces
OSCILLATION MODULE (LINEAR):
| Output rating | 0 – 51 mm (2”) |
| Oscillation speed | 0 – 2540 mm/min. (100 ipm) |
| Oscillation dwell | 0 – 1 second. Independently adjustable at both stroke endpoints |
| Cross seam adjustment | ± 25 mm (1.0”) |
OSCILLATION MODULE (PENDULAR):
Allows sockets/fillet welding
| Cross seam adjustment | ± 20 degrees |
| Torch vertical motion module | Stroke: 66 mm (2.625”) (motorized) Speed: 1520 mm/min. (60 ipm) maximum |
| Tractor module | Poly-Track® propulsion (patented) |
| Speed capability | 0 – 762 mm/min. (30 ipm). Higher speed motors available |
| Travel direction | Switch selectable (on head) |
| Wire | Wire diameter: 0.8 – 1.6 mm (0.03 – 0.62”) Wire feed speed: 0.5 – 22 m/min. (20 – 866 ipm) Wire spool size: 15/16 kg (25/33 lbs) |
| Water-cooled torch | Amperage capability: 300 amps continuous. Uses standard torch components |
| Torch adjustment capability | Torch lead/lag adjustment: ± 15 degrees (manual) Torch tilt adjustment: ± 10 degrees (manual) Angle bracket (optional): ± 45 degrees (manual) |
Dimensions/weights:
| Axial Length A1 | Minimum Radial Clearance B2 | Overall Width C | Weight 3 | |
| 609 WFOF | 38.7cm (15.25”) | 24.8cm (9.75”) | 30.5cm (12”) | 9.8 kgs (21.5 lbs) |
| 609 WFPP | 37.5cm (14.75”) | 24.1cm (9.50”) | 41.3cm (16.25”) | 11.6 kgs (26.5 lbs) |
| 609 WFOH | 66.7cm (26.25”) | 26.7cm (10.5”) | 36.8cm (14.5”) | 14.4 kgs (31.75 lbs) |
1 Center of oscillation stroke
2 Center of vertical stroke
3 Weight without wire spool (WFOH). Includes 1.6 kg (3.5 lb.) of Torch Cable Weight (Partial)
