Magnatech Quicklamp 432 433 Orbital Weld Heads for Multi-Pass Pipe Welding
- Prihláste sa alebo zaregistrujte pre získanie zľavy
- Doprava nad 150€ bez DPH zadarmo
- Záručný a pozáručný servis
- Odborné poradenstvo
| Názov | Kód | Obrázok | Cena bez DPH | Cena s DPH | Množstvo | |
| Magnatech Quicklamp 432 433 Orbital Weld Heads for Multi-Pass Pipe Welding |
|
|||||
The Magnatech Quickclamp weld heads are designed to make pipe-to-pipe and pipe-to-fitting welds. They are “full function” – with the capability of reproducing all the precise motions of a skilled welder. A continuously adjustable clamp eliminates the need to interchange components when changing pipe sizes. Simply slip the head over the pipe and clamp with a toggle lever. The Quickclamp heads improve productivity by increasing duty cycle, reducing repair rates, and producing welds of consistent quality.
Applications:- Fossil Power Plant Construction/Maintenance
- Steam Generation Equipment Fabrication
- Nuclear Power Plant Construction/Maintenance
- Shipyard Construction
- Fabrication Shops
- Chemical/Petrochemical Facility Construction and Maintenance
- Process Piping
- Multipass welding of tubes/pipes in all gravity positions
- Use economical standard 1 kg (2 lb.) wire spools
- Push button clutch for rapid cable unwind
- Heat tolerant steel bearings and chain drive
- Waterproof Carry Case/Tool Kit standard
- Socket Welding Kit and Tilt AVC option for angled torch applications
- Water-Cooled Torch uses standard expendables
| Quickclamp Model 432 | Quickclamp Model 433 | |
| Application | Multi-pass orbital GTAW pipe-to-pipe, pipe-to-fitting | Multi-pass orbital GTAW pipe-to-pipe, pipe-to-fitting |
| Pipe (tube) OD size range | 25 – 89 mm (1.0” – 3.5”) | 60 – 168 mm (2.375” – 6.625”) |
| Filler wire module | Wire size: 0.8, 0.9, 1.0 mm (.030, .035, .040”) Max. speed capability: 2540 mm/min. (100 IPM) | Wire size: 0.8, 0.9, 1.0 mm (.030, .035, .040”) Max. speed capability: 2540 mm/min. (100 IPM) |
| Arc gap control module | 13 mm (0.5”) stroke. Additional mechanical adjustment allows welding heavier wall pipe | 13 mm (0.5”) stroke. Additional mechanical adjustment allows welding heavier wall pipe |
| Torch propulsion module | 0.1 – 1.8 rpm | 0.05 – 0.9 rpm |
| Oscillation module | Max. oscillation stroke amplitude: 16 mm (0.625”) Max. oscillation speed: 1520 mm/min. (60 IPM) Oscillation dwell: 0 – 1 second Cross seam adjustment: ± 6.4 mm (± 0.25”) | Max. oscillation stroke amplitude: 16 mm (0.625”) Max. oscillation speed: 1520 mm/min. (60 IPM) Oscillation dwell: 0 – 1 second Cross seam adjustment: ± 6.4 mm (± 0.25”) |
| Water-cooled torch | 200 A continuous | 200 A continuous |
| Torch adjustment capability | Torch lead/lag adjustment: ± 15 degrees (manual) Torch tilt adjustment: ± 10 degrees (manual) | Torch lead/lag adjustment: ± 15 degrees (manual) Torch tilt adjustment: ± 10 degrees (manual) |
| Power supply compatibility | Pipemaster 515, Pipemaster 516 | Pipemaster 515, Pipemaster 516 |
Dimension and weights:
| Quickclamp Model 432 | Quickclamp Model 433 | |
| Weight | 5.9 kg (13.0 lb.) | 8.1 kg (17.8 lb.) |
| Axial Clearance (Torch Centerline to Rear Extremity) (A) | 158 mm (6.24”) | 158 mm (6.24”) |
| Axial Clearance (Torch Centerline to Front Extremity) (B) | 10 mm (0.41”) | 10 mm (0.41”) |
| Width (C) | 241 mm (9.50”) | 321 mm (12.63”) |
| Radial Clearance Requirement (D) | 241 mm (9.50”) - Pipe OD 321 mm (12.63”) - Pipe OD ÷ 2 = Radial Clearance ÷ 2 = Radial Clearance | 241 mm (9.50”) - Pipe OD 321 mm (12.63”) - Pipe OD ÷ 2 = Radial Clearance ÷ 2 = Radial Clearance |